iglide® G300: The All-Rounder

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

r = max. 0.5
Based on I.D.
f = .012 ➝ d1 .040” - .236”
f = .019 ➝ d1 > .236” - .472”
f = .031 ➝ d1 > .472” - 1.18”
f = .047 ➝ d1 > 1.18”

With the selected part you'll arrive at:

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Outer diameter d2 [inch]:
s [inch]:
d4 [inch]:
d5 [inch]:
d6 [inch]:
h [inch]:

d1-Tolerance :	+ .010
d2-Tolerance :	- .010
d4-Tolerance :	+/- .005
d5-Tolerance :	.015/+.005
d6-Tolerance :	+ .005
h-Tolerance :	+ .008
s-Tolerance :	- .0020

With the selected part you'll arrive at:

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Outer diameter d2 [inch]:
d1-Tolerance min. [inch]:
d1-Tolerance max. [inch]:
Tolerance for d1 :

Based on I.D.
f = 0.3 ➝ d1 1 - 6 mm
f = 0.5 ➝ d1 > 6 - 12 mm
f = 0.8 ➝ d1 > 12 - 30 mm
f = 1.2 ➝ d1 > 30 mm

With the selected part you'll arrive at:

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1-Tolerance min. [inch]:
d1-Tolerance max. [inch]:
Tolerance for d1 :

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

r = max. 0.5
Based on I.D.
f = 0.3 ➝ d1 1 - 6 mm
f = 0.5 ➝ d1 > 6 - 12 mm
f = 0.8 ➝ d1 > 12 - 30 mm
f = 1.2 ➝ d1 > 30 mm

With the selected part you'll arrive at:

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Outer diameter d2 [inch]:
s [inch]:
d4 [inch]:
d5 [inch]:
d6 [inch]:
h [inch]:

d1-Tolerance :	+0,25
d2-Tolerance :	-0,25
d4-Tolerance :	+/- 0,2
d5-Tolerance :	+0,375/+0,125
d6-Tolerance :	+ 0,12
h-Tolerance :	+/- 0,2
s-Tolerance :	-0,05

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Shaft h9

With the selected part you'll arrive at: